Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
Whelen HHS5200 Control System
The Whelen HHS5200 is a next-generation 200-watt siren amplifier designed for modern emergency-vehicle installations requiring powerful audible warning, programmable vehicle functions, and integration with Whelen’s current WeCanX® ecosystem. Its compact, low-profile housing makes it easier to incorporate into patrol vehicles, fire and EMS units, command vehicles, and other public-safety builds where equipment space is limited.
A new Class D amplifier improves operating efficiency while providing dependable high-output siren performance. The HHS5200 also expands installation flexibility with a 10–30 VDC operating range, allowing it to work across a broader range of vehicle electrical systems than earlier HHS platforms.
The HHS5200 integrates directly with WeCanX-compatible warning equipment and can be paired with Whelen Core® control heads. Lighting, siren, Arges® spotlight, V2V synchronization, and other compatible functions can therefore be incorporated into a coordinated vehicle warning system while allowing the operator interface to be selected separately for the particular build.
Digital Voice Messaging (DVM) capability is available for prerecorded instructions during evacuations, traffic stops, incident scenes, and other situations where clear public communication is needed. The HHS5200 also supports Vehicle-to-Vehicle Sync, allowing compatible WeCanX-equipped vehicles operating near one another to coordinate lighting and audible warning behavior.
200-watt siren amplifier
Current-generation WeCanX® integration
New high-efficiency Class D amplifier
10–30 VDC operation
9 high-current outputs
8 × 10A relay outputs
1 × 15A relay output
Maximum siren input current: 20A
20A siren input fuse
Compatible with one Whelen Core® control head, including:
CCTL5
CCTL6
CCTL7
CCTL8 / CCTL8LM
CCTL9 / CCTL9LM
CCTL10
CCTL11 / CCTL11LM
Supports applicable WeCanX equipment, including:
Front FST™ or XLP Inner Edge®
Rear RST™ Inner Edge®
WeCanX lightbar
External WeCanX siren amplifier or Howler™ amplifier
Up to two Arges® spotlights
Arges control head
V2V synchronization module
Vehicle-to-Vehicle Sync
Digital Voice Messaging
Programmable through Whelen Command®
Supports Whelen Command siren-tone library
Very low standby current: less than 1 mA with backlighting off
Operating temperature: -30°C to 60°C
Approximate dimensions:
Width: 9"
Height: 7.75"
Depth: 1.5"
Applicable compliance includes:
SAE standards
SAE J1849
KKK-A-1822F
California Title 13
CISPR 25
The Whelen HHS5200 is a next-generation 200-watt siren amplifier designed for modern emergency-vehicle installations requiring powerful audible warning, programmable vehicle functions, and integration with Whelen’s current WeCanX® ecosystem. Its compact, low-profile housing makes it easier to incorporate into patrol vehicles, fire and EMS units, command vehicles, and other public-safety builds where equipment space is limited.
A new Class D amplifier improves operating efficiency while providing dependable high-output siren performance. The HHS5200 also expands installation flexibility with a 10–30 VDC operating range, allowing it to work across a broader range of vehicle electrical systems than earlier HHS platforms.
The HHS5200 integrates directly with WeCanX-compatible warning equipment and can be paired with Whelen Core® control heads. Lighting, siren, Arges® spotlight, V2V synchronization, and other compatible functions can therefore be incorporated into a coordinated vehicle warning system while allowing the operator interface to be selected separately for the particular build.
Digital Voice Messaging (DVM) capability is available for prerecorded instructions during evacuations, traffic stops, incident scenes, and other situations where clear public communication is needed. The HHS5200 also supports Vehicle-to-Vehicle Sync, allowing compatible WeCanX-equipped vehicles operating near one another to coordinate lighting and audible warning behavior.
200-watt siren amplifier
Current-generation WeCanX® integration
New high-efficiency Class D amplifier
10–30 VDC operation
9 high-current outputs
8 × 10A relay outputs
1 × 15A relay output
Maximum siren input current: 20A
20A siren input fuse
Compatible with one Whelen Core® control head, including:
CCTL5
CCTL6
CCTL7
CCTL8 / CCTL8LM
CCTL9 / CCTL9LM
CCTL10
CCTL11 / CCTL11LM
Supports applicable WeCanX equipment, including:
Front FST™ or XLP Inner Edge®
Rear RST™ Inner Edge®
WeCanX lightbar
External WeCanX siren amplifier or Howler™ amplifier
Up to two Arges® spotlights
Arges control head
V2V synchronization module
Vehicle-to-Vehicle Sync
Digital Voice Messaging
Programmable through Whelen Command®
Supports Whelen Command siren-tone library
Very low standby current: less than 1 mA with backlighting off
Operating temperature: -30°C to 60°C
Approximate dimensions:
Width: 9"
Height: 7.75"
Depth: 1.5"
Applicable compliance includes:
SAE standards
SAE J1849
KKK-A-1822F
California Title 13
CISPR 25

